Dell PowerEdge FX2/FX2s - Manual (Page 221)

Example of Viewing LLDP Global Configurations
R1(conf)#protocol lldp
R1(conf-lldp)#show config
!
protocol lldp
advertise dot3-tlv max-frame-size
advertise management-tlv system-capabilities system-description
hello 10
no disable
R1(conf-lldp)#
Example of Viewing LLDP Interface Configurations
R1(conf-lldp)#exit
R1(conf)#interface tengigabitethernet 0/3
R1(conf-if-te-0/3)#show config
!
interface tengigabitEthernet 0/3
switchport
no shutdown
R1(conf-if-te-0/3)#protocol lldp
R1(conf-if-te-0/3-lldp)#show config
!
protocol lldp
R1(conf-if-te-0/3-lldp)#
Viewing Information Advertised by Adjacent LLDP Agents
To view brief information about adjacent devices or to view all the information that neighbors are
advertising, use the following commands.
• Display brief information about adjacent devices.
show lldp neighbors
• Display all of the information that neighbors are advertising.
show lldp neighbors detail
Example of Viewing Brief Information Advertised by Neighbors
Dell(conf-if-te-0/3-lldp)#end
Dell (conf-if-te-0/3)#do show lldp neighbors
Loc PortID Rem Host Name Rem Port Id Rem Chassis Id
--------------------------------------------------------------------
Te 0/1 - TenGigabitEthernet 0/5 00:01:e8:05:40:46
Te 0/2 - TenGigabitEthernet 0/6 00:01:e8:05:40:46
Dell (conf-if-te-0/3)#
Example of Viewing Details Advertised by Neighbors
Dell#show lldp neighbors detail
========================================================================
Local Interface Te 0/4 has 1 neighbor
Total Frames Out: 6547
Total Frames In: 4136
Total Neighbor information Age outs: 0
Total Frames Discarded: 0
Total In Error Frames: 0
Total Unrecognized TLVs: 0
Total TLVs Discarded: 0
Next packet will be sent after 7 seconds
PMUX Mode of the IO Aggregator 221