Dell 2135cn Color Laser Printer - Manual (Page 63)

The printer automatically returns to the standby mode from the power saver mode when it receives data from the computer or remote fax machine. You can
also change the status of the printer to the standby mode by pressing any button on the operator panel.
Auto Reset
Purpose:
To automatically reset the settings for COPY, SCAN, or FAX to the default settings and return to the standby mode after you do not specify any settings for the
specified time.
Values:
Alert Tone
Purpose:
To configure settings for tones emitted by the printer during operation or when a warning message appears.
Values:
45sec*
1min
2min
3min
4min
Panel Select Tone
Low
Emits a tone when the operator panel input is correct. Medium
High
Off* Does not emit a tone when the operator panel input is correct.
Panel Alert Tone
Low
Emits a tone when the operator panel input is incorrect. Medium
High
Off* Does not emit a tone when the operator panel input is incorrect.
Machine Ready Tone
Low
Emits a tone when the printer is ready to process a job. Medium*
High
Off
Does not emit a tone when the printer is ready to process a job.
Copy Job Tone
Low
Emits a tone when a copy job is complete. Medium*
High
Off Does not emit a tone when a copy job is complete.
Non-Copy Job Tone
Low
Emits a tone when a job other than a copy job is complete. Medium*
High
Off Does not emit a tone when a job other than a copy job is complete.
Fault Tone
Low
Emits a tone when a job ends abnormally. Medium*
High
Off Does not emit a tone when a job ends abnormally.
Alert Tone
Low
Emits a tone when a problem occurs. Medium*
High
Off Does not emit a tone when a problem occurs.
Out of Paper
Low
Emits a tone when the printer runs out of paper. Medium*
High
Off Does not emit a tone when the printer runs out of paper.
Low