Dell 2135cn Color Laser Printer - Manual (Page 25)

Clock Settings
Purpose:
To specify the clock settings.
Values:
Alert Tone
Low Toner Tone
Emits a tone at the specified volume when the toner or some other consumable is
low.
Medium*
High
Off Does not emit a tone when the toner or some other consumable is low.
Auto Clear Alert
Tone
Low
Emits a tone at the specified volume 5 seconds before the printer performs auto
clear.
Medium
High
Off* Does not emit a tone before the printer performs auto clear.
Base Tone
Low
Emits a tone when the operator panel display is returned to the default setting. Medium
High
Off*
Does not emit a tone when the operator panel display is returned to the default
setting.
Time-Out
0 Disables the job time-out.
5-300 seconds
Specifies the amount of time the printer waits for additional data from the computer
before it cancels the job.
30 seconds*
Panel Language
English*
Specifies the language to be used on the operator panel.
French
Italian
German
Spanish
Dutch
Danish
Norwegian
Swedish
Auto Log Print
Off* Does not automatically print a job history report after every 20 jobs.
On Automatically prints a job history report after every 20 jobs.
Print ID
Off* Does not print the user ID.
Top Left
Prints the user ID on the specified location.
Top Right
Bottom Left
Bottom Right
Print Text
Off Does not print the received PDL data as text data.
On* Prints the received PDL data as text data.
RAM Disk
Disable
Does not allocate RAM for the disk file system. Secure Print and Proof Print jobs will
abort and be recorded to the job log.
50MBytes
Allocates RAM for the disk file system automatically. 100MBytes*
150MBytes
Substitute Tray
Off No tray size substitute accepted.
Larger Size
Substitutes paper of next largest size. When there is no larger paper size, the
printer substitutes paper of nearest size.
Nearest Size* Substitutes paper of nearest size.
mm/inch
millimeter (mm)
Selects millimeter or inch as the default measurement unit.
inch (")*
Apply New Settings
After you complete the settings, press the Apply New Settings button to apply the
changes.
Restart printer to apply new settings Press the Restart printer to apply new settings button to apply the changes.
*1 Enter 3 in Power Saver Timer Mode 1 or Power Saver Timer Mode 2 to put the printer in the power saver timer mode five minutes after it finishes a
job. This uses much less energy, but requires more warm-up time for the printer. Enter 3 if your printer shares an electrical circuit with room lighting and you
notice lights flickering.
Select a high value if your printer is in constant use. Under most circumstances, this keeps the printer ready to operate with minimum warm-up time. Select a
value between 5 and 60 minutes for the power saver timer mode if you want a balance between energy consumption and a shorter warm-up period.
The printer automatically returns to the standby mode from the power saver timer mode when it receives data from the computer. You can also return the
printer to the standby mode by pressing any button on the operator panel.