Dell 2135cn Color Laser Printer - Manual (Page 34)

Diagnosis
The Diagnosis tab includes the Chart Print, Machine Check, Paper Wrinkle Check Mode, Environment Sensor Info, Developer Stir Mode, and Refresh
Mode pages.
Chart Print
Purpose:
To print various charts that can be used for the printer's diagnosis.
Values:
Machine Check
Purpose:
Fax Fwd Err
Print
On* Prints incoming faxes that failed to be forwarded when Fax Fwd Print is not selected.
Off Does not print incoming faxes that failed to be forwarded when Fax Fwd Print is not selected.
Prefix Dial
On Sets a prefix dial number.
Off* Does not set a prefix dial number.
Prefix Dial Num 5byte Sets a prefix dial number of up to five digits. This number dials before any auto dial number is started.
Discard Size
Off* Prints any excess at the bottom of a fax page without discarding it.
On Discards any excess at the bottom of the page.
Auto Reduction Automatically reduces a fax page to fit it onto the appropriate sized paper.
ECM
On* Enables the ECM (Error Correction Mode). To use the ECM, the remote machines must also support the ECM.
Off Disables the ECM.
Modem Speed
2.4
Allows you to adjust the fax modem speed when a fax transmission or reception error occurs. The default is 33.6.
4.8
9.6
11.4
33.6*
Fax Activity
Auto Print* Automatically prints a fax activity report after every 50 incoming and outgoing fax communications.
No Auto Print Does not print a fax activity report automatically.
Fax Transmit
Print Always Prints a transmission report after every fax transmission.
Print On Error* Prints a transmission report only when an error occurs.
Print Disable Does not print a transmission report after a fax transmission.
Fax Broadcast
Print Always* Prints a transmission report after every fax transmission.
Print On Error Prints a transmission report only when an error occurs.
Print Disable Does not print a transmission report after a fax transmission to multiple destinations.
Fax Protocol
Print Always Prints a protocol monitor report after every fax transmission.
Print On Error Prints the protocol monitor report only when an error occurs.
Print Disable* Does not print the protocol monitor report.
Country
Selects the country where the printer is used.
The default is United States.
Apply New Settings After you complete the settings, press the Apply New Settings button to apply the changes.
Restart printer to apply new
settings
Press the Restart printer to apply new settings button to apply the changes.
NOTE: Values marked by an asterisk (*) are the factory default menu settings.
Pitch Configuration Chart
Outputs full halftone pages for yellow, magenta, cyan, and black. Also outputs pages to check the pitch. A total of five pages
are output. The chart is output to A4 or Letter size paper.
Ghost Configuration Chart Outputs a chart to check for ghost printing. One page is output. The chart is output to A4 or Letter size paper.
4 Colors Configuration
Chart Bands of yellow, magenta, cyan, and black are output with varying density. One page is output. The chart is output to A4 or
Letter size paper.
MQ Chart Outputs charts to check for the binding in A4 or Letter.
Alignment Chart
Outputs a chart to check for proper alignment of the print image on the paper. One page is output. The chart is output to A4 or
Letter size paper.
PHD Refresh
Configuration Chart
Outputs a chart to check the light fatigue of the PHD unit. One page is output. The chart is output to A4 or Letter size paper.