Dell 2135cn Color Laser Printer - Manual (Page 32)

Fax Settings
Lighter/Darker
Makes the copy lighter than the original. Works well with dark print. Lighter 2
Lighter 1
Normal* Works well with standard typed or printed documents.
Darker 1
Makes the copy darker than the original. Works well with light print or faint pencil markings. Darker 2
Darker 3
Sharpness
Softer Makes the copy softer than the original.
Normal* Does not make the copy sharper or softer than the original.
Sharper Makes the copy sharper than the original.
Color Saturation
Low Decreases the color saturation to lighten the color of the copy.
Medium* The color saturation is the same as the original.
High Increases the color saturation to brighten the color of the copy.
Auto Exposure
On* Suppresses the background of the original to enhance text on the copy.
Off Does not suppress the background.
Auto Expo. Level
Normal Sets the background suppression level to Normal.
Higher(1) Sets the background suppression level to Higher(1).
Higher(2) Sets the background suppression level to Higher(2).
Color Balance (Yellow Low)
-3-3
Sets the color balance level of low density yellow. The default is 0.
0*
Color Balance (Yellow Mid)
-3-3
Sets the color balance level of medium density yellow. The default is 0.
0*
Color Balance (Yellow High)
-3-3
Sets the color balance level of high density yellow. The default is 0.
0*
Color Balance (Magenta Low)
-3-3
Sets the color balance level of low density magenta. The default is 0.
0*
Color Balance (Magenta Mid)
-3-3
Sets the color balance level of medium density magenta. The default is 0.
0*
Color Balance (Magenta High)
-3-3
Sets the color balance level of high density magenta. The default is 0.
0*
Color Balance (Cyan Low)
-3-3
Sets the color balance level of low density cyan. The default is 0.
0*
Color Balance (Cyan Mid)
-3-3
Sets the color balance level of medium density cyan. The default is 0.
0*
Color Balance (Cyan High)
-3-3
Sets the color balance level of high density cyan. The default is 0.
0*
Color Balance (Black Low)
-3-3
Sets the color balance level of low density black. The default is 0.
0*
Color Balance (Black Mid)
-3-3
Sets the color balance level of medium density black. The default is 0.
0*
Color Balance (Black High)
-3-3
Sets the color balance level of high density black. The default is 0.
0*
Multiple-Up
Off* Does not perform multiple-up printing.
Auto Automatically reduces the original pages to fit onto one sheet of paper.
ID Copy Prints the original pages onto one sheet of paper in the original size.
Manual
Prints the original pages onto the one sheet of paper in the size specified in
Reduce/Enlarge.
Collated
Uncollated* Does not sort the copy job.
Collated Sorts the copy job.
Margin Top/Bottom
0.0-2.0 inch (0-50 mm)
Specifies the value of the top and bottom margins.
0.2 inch* (4 mm)
Margin Left/Right
0.0-2.0 inch (0-50 mm)
Specifies the value of the left and right margins.
0.2 inch* (4 mm)
Margin Middle
0.0-2.0 inch (0-50 mm)
Specifies the value of the middle margin.
0.0 inch* (0 mm)
Apply New Settings After you complete the settings, press the Apply New Settings button to apply the changes.
Restart printer to apply new settings Press the Restart printer to apply new settings button to apply the changes.