Acronis Backup for Windows Server Essentials - User Guide User Manual
Page 398

398
Copyright © Acronis International GmbH, 2002-2014
Default value: 1048576 (that is, 1 GB)
Percentage To Keep
Description: Specifies the percentage of the maximum log size to keep on cleanup.
Possible values: Any integer number between 0 and 100
Default value: 95
For details on how the agent log is cleaned up, see Log cleanup rules (p. 337).
Windows Event Log
Specifies when to record Acronis Backup Agent's events into the Application Event Log in
Windows.
This parameter has two settings:
Trace State
Description: Specifies whether to record the agent's events into the event log.
Possible values: Enabled or Disabled
Default value: Enabled
Trace Level
Description: Specifies the minimum level of severity of events to be recorded into the event
log. Only events of levels greater than or equal to the value in Trace Level will be recorded.
Possible values: 0 (Internal event), 1 (Debugging information), 2 (Information), 3 (Warning), 4
(Error), or 5 (Critical error)
Default value: 4 (only errors and critical errors will be sent—if Trace State is set to Enabled)
SNMP
Specifies the types of the agent's events to send notifications about by means of Simple Network
Management Protocol (SNMP).
This parameter has the following settings:
Trace State
Description: Specifies whether to send the SNMP notifications.
Possible values: Enabled or Disabled
Default value: Enabled
Trace Level
Description: Specifies the minimum level of severity of events for sending SNMP notifications
about them. Only notifications about events of levels greater than or equal to Trace Level
will be sent.
Possible values: 0 (Internal event), 1 (Debugging information), 2 (Information), 3 (Warning), 4
(Error), or 5 (Critical error)
Default value: 4 (only errors and critical errors will be sent—if Trace State is set to Enabled)
SNMP Address
Description: Specifies the network name or IP address of the SNMP server.
Possible values: Any string 0 to 32765 characters long
Default value: Empty string
SNMP Community
Description: Specifies the community name for the SNMP notifications.
Possible values: Any string 0 to 32765 characters long