1 actions on centralized vaults, P. 178) – Acronis Backup for Windows Server Essentials - User Guide User Manual
Page 178

178
Copyright © Acronis International GmbH, 2002-2014
FTP/SFTP server
No
Yes
7.1.2.1
Actions on centralized vaults
To access actions
1. Connect the console to the management server.
2. In the Navigation pane, click Vaults > Centralized.
All the operations described here are performed by clicking the corresponding buttons on the vaults
toolbar. These operations can be also accessed from the [Vault name] actions item of the main
menu.
The following is a guideline for you to perform operations with centralized vaults.
To
Do
Create a managed or an
unmanaged vault
1. Click
Create.
2. In the Type field, select the vault type: Managed or Unmanaged
The procedure of creating centralized vaults is described in-depth in the following
sections:
Create a managed centralized vault (p. 179)
Create an unmanaged centralized vault (p. 183)
Edit a managed or an
unmanaged vault
1. Select the vault.
2. Click
Edit.
Depending on the vault you select (managed or unmanaged), the respective Edit
page will be opened:
The Edit managed vault page lets you change the vault's name, user accounts
and information in the Comments field.
The Edit unmanaged vault page lets you edit the vault's name and information in
the Comments field.
Detach a managed vault 1. Select the vault.
2. Click
Detach.
Detaching a vault removes association between the vault and the storage node and
deletes this vault from the GUI. Nevertheless, all archives stored in the vault will
remain untouched. The plans and tasks that use this vault will fail.
Later on, you'll be able to attach this detached vault to the same or to another
storage node.
Notes.
Tape-based vaults cannot be detached.
To detach a vault from an unavailable storage node, remove the storage node (p.
218) from the management server.
Attach the previously
detached managed vault
Click
Attach.
The procedure of attaching a managed vault to a storage node is described in-depth
in the Attaching a managed vault (p. 184) section.
Note. Tape-based vaults cannot be attached.