Motorola 3347 User Manual
Page 84
84
Check the
Enabled checkbox
and click the
Submit
button.
The screen expands to
allow you to enter subnet
information.
If
DHCP Server (see
below) is not enabled, the
DHCP Star t Address and
DHCP End Address fields
do not appear.
Enter the Router’s IP
address on the subnet in
the
IP Address field and
the subnet mask for the
subnet in the
Netmask
field.
Enter the
DHCP Start Address and End Address of the subnet range in their respec-
tive fields.
Ranges cannot overlap and there may be only one range per subnet.
•
Click the
Submit
button.
•
When you are finished adding subnets, click the
Save Changes
button, and when
prompted, restar t the Router.
To delete a configured subnet, set both the IP address and subnet mask values to 0.0.0.0,
either explicitly or by clearing each field and clicking the
Submit
button to commit the
change.
☛
NOTE:
All additional DHCP ranges use the global lease period value. See
If you make any changes, click the
Save Changes
button.