Motorola 3347 - Manual (Page 243)

243
CONFIG Commands
set ppp module [vccn] protocol-compression { on | off }
Specifies whether you want the Motorola Netopia® Gateway to compress the PPP Protocol
field when it transmits datagrams over the PPP link.
set ppp module [vccn] lcp-echo-requests { on | off }
Specifies whether you want your Motorola Netopia® Gateway to send LCP echo requests.
You should turn off LCP echoing if you do not want the Motorola Netopia® Gateway to drop
a PPP link to a nonresponsive peer.
set ppp module [vccn] echo-period integer
Specifies the number of seconds the Motorola Netopia® Gateway should wait before send-
ing another echo from an LCP echo request. The integer argument can be any number from
between 5 and 300 (seconds).
set ppp module [vccn] lost-echoes-max integer
Specifies the maximum number of lost echoes the Motorola Netopia® Gateway should tol-
erate before bringing down the PPP connection. The integer argument can be any number
from between 1 and 20.
set ppp module [vccn] failures-max integer
Specifies the maximum number of Configure-NAK messages the PPP module can send
without having sent a Configure-ACK message. The integer argument can be any number
between 1 and 20.
set ppp module [vccn] configure-max integer
Specifies the maximum number of unacknowledged configuration requests that your Motor-
ola Netopia® Gateway will send. The integer argument can be any number between 1 and
20.