Motorola 3347 User Manual

Page 256

256

☛

NOTE:

The Gateway’s WAN DHCP client por t in SilentRunning mode is

enabled. This

feature allows end users to continue using DHCP-ser ved IP addresses from
their Ser vice Providers, while having no identifiable presence on the Internet.

SafeHarbour IPSec Settings

SafeHarbour VPN is a tunnel between the local network and another geographically dis-
persed network that is interconnected over the Internet. This VPN tunnel provides a
secure, cost-effective alternative to dedicated leased lines. Internet Protocol Security
(IPsec) is a series of ser vices including encr yption, authentication, integrity, and replay pro-
tection. Internet Key Exchange (IKE) is the key management protocol of IPsec that estab-
lishes keys for encr yption and decr yption. Because this VPN software implementation is
built to these standards, the other side of the tunnel can be either another Motorola Neto-
pia® unit or another IPsec/IKE based security product. For VPN you can choose to have
traffic authenticated, encr ypted, or both.

When connecting the Motorola Netopia® unit in a telecommuting scenario, the corporate
VPN settings will dictate the settings to be used in the Motorola Netopia® unit. If a param-
eter has not been specified from the other end of the tunnel, choose the default unless you
fully understand the ramifications of your parameter choice.

set security ipsec option (off) {on | off}

Turns on the SafeHarbour IPsec tunnel capability. Default is off. See

“IPSec” on page 94

for more information.

DHCP ser ver

Enabled

161

snmp

Enabled

ping (ICMP)

Enabled

WAN - Disabled

LAN -
Local Address
Only