Motorola 3347 User Manual
Page 280
280
set wireless no-bridging [ off | on ]
When set to
on, this will block wireless clients from communicating with other wireless cli-
ents on the LAN side of the Gateway.
set wireless tx-power [ full | medium | fair | low | minimal ]
Sets the wireless transmit power, scaling down the router's wireless transmit coverage by
lowering its radio power output. Default is full power. Transmit power settings are useful in
large venues with multiple wireless routers where you want to reuse channels. Since there
are only three non-overlapping channels in the 802.11 spectrum, it helps to size the Gate-
way’s cell to match the location. This allows you to install a router to cover a small “hole”
without conflicting with other routers nearby.