Motorola 3347 - Manual (Page 186)

186
Use the segment argument to ping a neighbor switch.
Use the end-to-end argument to ping a remote end node.
reset dhcp client release [ vcc-id ]
Releases the DHCP lease the Motorola Netopia® Gateway is currently using to acquire the
IP settings for the specified DSL por t. The
vcc-id identifier is an “index” letter in the
range B-I, and does not directly map to the VCC in use. Enter the reset dhcp client
release command without the variable to see the letter assigned to each vir tual circuit.
reset dhcp client renew [ vcc-id ]
Releases the DHCP lease the Motorola Netopia® Gateway is currently using to acquire the
IP settings for the specified DSL por t. The
vcc-id identifier is an “index” letter in the
range B-I, and does not directly map to the VCC in use. Enter the reset dhcp client
release without the variable to see the letter assigned to each vir tual circuit.
reset dsl
Resets any open DSL connection.
reset ppp vccn
Resets the point-to-point connection over the specified vir tual circuit. This command only
applies to vir tual circuits that use PPP framing.
show atm [all]
Displays ATM statistics for the Motorola Netopia® Gateway. The optional all argument
displays a more detailed set of ATM statistics.
show dsl [ all ]
Displays DSL por t statistics, such as upstream and downstream connection rates and
noise levels.