Motorola 3347 - Manual (Page 173)

173
SHELL Commands
The server_address argument identifies the IP address of the TFTP ser ver on which
your Motorola Netopia® Gateway operating software is stored. The filename argument
identifies the path and name of the operating software file on the TFTP ser ver.
If you include the optional keyword confirm , you will not be prompted to confirm whether
or not you want to per form the operation.
license [key]
This command installs a software upgrade key. An upgrade key is a purchased item, based
on the serial number of the gateway.
log message_string
Adds the message in the message_string argument to the Motorola Netopia® Gateway
diagnostic log.
loglevel [ level ]
Displays or modifies the types of log messages you want the Motorola Netopia® Gateway
to record. If you enter the
loglevel command without the optional level argument,
the command line inter face displays the current log level setting.
You can enter the loglevel command with the level argument to specify the types of
diagnostic messages you want to record. All messages with a level number equal to or
greater than the level you specify are recorded. For example, if you specify loglevel 3, the
diagnostic log will retain high-level informational messages (level 3), warnings (level 4),
and failure messages (level 5).
Use the following values for the level argument:
• 1 or low – Low-level informational messages or greater; includes trivial status mes-
sages.
• 2 or medium – Medium-level informational messages or greater; includes status mes-
sages that can help monitor network traffic.
• 3 or high – High-level informational messages or greater; includes status messages
that may be significant but do not constitute errors.
• 4 or warning – Warnings or greater; includes recoverable error conditions and useful
operator information.