Motorola 3347 - Manual (Page 174)

174
• 5 or failure – Failures; includes messages describing error conditions that may
not be recoverable.
netstat -i
Displays the IP inter faces for your Motorola Netopia® Gateway.
netstat -r
Displays the IP routes stored in your Motorola Netopia® Gateway.
nslookup { hostname | ip_address }
Per forms a domain name system lookup for a specified host.
• The hostname argument is the name of the host for which you want DNS information;
for example, nslookup klaatu .
• The ip_address argument is the IP address, in dotted decimal notation, of the device
for which you want DNS information.
ping [-s size ] [-c count ]{ hostname | ip_address }
Causes the Motorola Netopia® Gateway to issue a series of ICMP Echo requests for the
device with the specified name or IP address.
• The hostname argument is the name of the device you want to ping; for example, ping
ftp.netopia.com .
• The ip_address argument is the IP address, in dotted decimal notation, of the device
you want to locate. If a host using the specified name or IP address is active, it returns
one or more ICMP Echo replies, confirming that it is accessible from your network.
• The -s size argument lets you specify the size of the ICMP packet.
• The -c count argument lets you specify the number of ICMP packets generated for the
ping request. Values greater than 250 are truncated to 250.
You can use the ping command to determine whether a hostname or IP address is
already in use on your network. You cannot use the ping command to ping the Motorola
Netopia® Gateway’s own IP address.