Motorola 3347 - Manual (Page 279)

279
CONFIG Commands
set wireless multi-ssid second-ssid-wpa-ver { all | WPA1-only |
WPA2-only }
set wireless multi-ssid third-ssid-wpa-ver { all | WPA1-only |
WPA2-only }
set wireless multi-ssid fourth-ssid-wpa-ver { all | WPA1-only |
WPA2-only }
Specifies the type of WPA version enabled on multiple SSIDs when multi-ssid option is
set to on and privacy is set to WPA-PSK. See “Wireless Privacy Settings” on page 284 for
more information.
set wireless multi-ssid second-ssid-psk { string }
set wireless multi-ssid third-ssid-psk { string }
set wireless multi-ssid fourth-ssid-psk { string }
Specifies a WPA passphrase for the multiple SSIDs, when second-, third-, or fourth-ssid-
privacy is set to WPA-PSK. The Pre Shared Key is a passphrase shared between the
Gateway and the clients and is used to generate dynamically changing keys. The pass-
phrase can be 8 – 63 characters. It is recommended to use at least 20 characters for best
security.
set wireless multi-ssid second-ssid-weplen [ 40/64bit | 128bit | 256bit ]
set wireless multi-ssid third-ssid-weplen [ 40/64bit | 128bit | 256bit ]
set wireless multi-ssid fourth-ssid-weplen [ 40/64bit | 128bit | 256bit ]
Specifies the WEP key length for the multiple SSIDs, when second-, third-, or fourth-
ssid-privacy is set to WEP. 40bit encryption is equivalent to 64bit encryption. The longer
the key, the stronger the encr yption and the more difficult it is to break the encr yption.
set wireless multi-ssid second-ssid-wepkey { hexadecimal digits }
set wireless multi-ssid third-ssid-wepkey { hexadecimal digits }
set wireless multi-ssid fourth-ssid-wepkey { hexadecimal digits }
Specifies a WEP key for the multiple SSIDs, when second-, third-, or fourth-ssid-privacy
is set to WEP. For 40/64bit encryption, you need 10 digits; 26 digits for 128bit, and 58
digits for 256bit WEP. Valid hexadecimal characters are 0 – 9, a – f.