beautypg.com

Ethernet port settings – Motorola 3347 User Manual

Page 248

background image

248

set ip ip-ppp vcc1 mcast-fwd [ on | off }

Enables or disables multi-cast for warding on the specified inter face. If set to

on, this inter-

face acts as an IGMP proxy host, and IGMP packets are transmitted and received on this
inter face on behalf of IGMP hosts on the LAN inter face. See

“IGMP Settings” on page 211

for more information.

set ip ip-ppp vcc1 igmp-null-source-addr [ off | on ]

Enables or disables IGMP null source address, if

mcast-fwd is set to on. If enabled, the

source IP address of ever y IGMP packet transmitted from this inter face is set to 0.0.0.0.
This complies with the requirements of TR-101, and removes the need for a publicly adver-
tised IP address on the WAN inter face.

Ethernet Port Settings

set ethernet ethernet A mode { auto | 100M-full | 100M-full-fixed |
100M-half-fixed | 10M-full-fixed | 10M-half-fixed |
100M-half | 10M-full | 10M-half }

Allows mode setting for the ethernet por t. Only suppor ted on units without a LAN switch, or
dual ethernet products (338x). In the dual ethernet case, “ethernet B” would be specified
for the WAN por t. The default is

auto.