Motorola 3347 - Manual (Page 236)

236
Funnel Queue
A funnel queue is used to limit the rate of the transmission below the actual line rate:
set queue name funnel_queue_name option [ on | off ]
set queue name funnel_queue_name type funnel
set queue name funnel_queue_name input input_queue_name
set queue name funnel_queue_name bps bps
Specifies the Funnel Queue named funnel_queue_name attributes.
• funnel_queue_name – name of funnel queue
• input_queue_name – name of input queue
• bps – max bits per second permitted through funnel queue
By default, the following funnel queues are created:
Rate-limiting priority queue to 100Kbps:
set queue name pq-100kbps option on
set queue name pq-100kbps type funnel
set queue name pq-100kbps input pq
set queue name pq-100kbps bps 100000
Rate-limiting weighted fair queue to 100Kbps:
set queue name wfq-100kbps option on
set queue name wfq-100kbps type funnel
set queue name wfq-100kbps input wfq
set queue name wfq-100kbps bps 100000
Interface Queue Assignment
The WAN ethernet queue is assigned as follows:
set [ ethernet ethernet | ip ethernet B | ip-ppp vcc n ] tx-queue
queue_name
By default, the WAN ethernet inter face is assigned the default priority queue:
set ethernet ethernet B tx-queue pq
Other inter faces may likewise be assigned tx-queue values.