Bio-Rad Bio-Plex Manager™ MP Software Upgrade - Manual (Page 43)

Exporting Data to Bio-Plex Manager 6.x
User Guide | 41
Exporting Data from the Analyze/Export View
The result from a protocol reading is stored in the run results table. (See Run Results
Table on page 38 for more information.) You can export your run result at a later time
from the Analyze/Export view.
To export data from the Analyze/Export view
1. Click Analyze/Export in the navigation bar.
2. Click the row of the run result you want to export.
3. Click Export Results.
4. Enter the name of the file.
The default file name is the run result name, followed by the time stamp of the
time of the export. For example, Experiment 2013-02-12 13.04.08. You can
accept the default name or enter a different name for the file.
5. Click Save.
A message appears informing you that the result file has been exported.
If Bio-Plex Manager 6.x is installed on the same computer where you are
running Bio-Plex Manager MP, you are also asked if you want to open the
result in Bio-Plex Manager 6.x
6. In the Export Results dialog box, click Yes.
Bio-Plex Manager 6.x is launched and the data result appears in the Raw Data
table.
Note: You are now in the Bio-Plex Manager 6.x application.
Bio-Plex Manager MP continues to run and you can switch back and forth
between the two application windows.