Bio-Rad Bio-Plex Manager™ MP Software Upgrade - Manual (Page 20)

2 | Creating Protocols
18 | Bio-Plex Manager MP Software
In the following example, Autofill Down was used to create 20 Unknown wells.
Note, the numbering of the wells is top to bottom, then left to right. The arrow
shows the path of the cursor as it is dragged across the plate template.
Defining a Replicate Group
You can quickly format a replicate group.
To define a replicate group
1. Click Turn Autofill Off.
2. Click and drag your cursor over the wells that contain the same sample.
The wells are labeled with the same number.
Autofilling Replicate Groups
You can quickly format multiple replicate groups at one time.
To format a replicate group
1. Click Autofill Across or Autofill Down.