Bio-Rad Bio-Plex Manager™ MP Software Upgrade - Manual (Page 42)

3 | Running Protocols
40 | Bio-Plex Manager MP Software
Exporting Data from the Create/Run Protocols View
You must first export the result to a file before you can analyze the data.
To export data from the Create/Run Protocols view
1. From the Create/Run Protocols view, click Export Results.
2. In the Export Results dialog box, navigate to where you want the run result to
be saved.
3. Enter the name of the file.
The default file name is the Result Name assigned in the Run Settings dialog
box, followed by a time stamp of the time of the export. For example,
Experiment 2013-02-12 13.04.08. You can accept the default name or enter a
different name for the file.
4. Click Save.
A message appears informing you that the result file has been exported.
If Bio-Plex Manager 6.x is installed on the same computer where you are
running Bio-Plex Manager MP, you are also asked if you want to open the
result in Bio-Plex Manager 6.x
5. In the Export Results dialog box, click Yes.
Bio-Plex Manager 6.x is launched and the run result appears in the Raw Data
table.
Note: You are now in the Bio-Plex Manager 6.x application.
Bio-Plex Manager MP continues to run and you can switch back and forth
between the two application windows.