Bio-Rad Bio-Plex Manager™ MP Software Upgrade - Manual (Page 27)

User Guide | 25
3 Running Protocols
Once your protocol is created, you are ready to run the protocol. The result is
displayed in the raw data table and bead map and it can be exported to
Bio-Plex Manager™ 6.x software for analysis. You can interrupt a run at any time,
make any necessary changes to the protocol, and resume the run with no loss of
data. Bio-Plex Manager™ MP software provides graphical clues and alerts
informing you when it detects problems with your run.
Running the Recommended Routine
Run the routine in the Recommended Routine section of the Maintenance view each
day you use the MAGPIX instrument. This keeps the instrument free of bubbles and
ensures that it is operating according to specifications.
To run the recommended routine
1. Navigate to the Maintenance view.
2. In the Recommended Routine section, click Select to select the routine.
3. Fill the reservoirs and the well strip with the solutions indicated in the Reagent
Block.
4. Click Start.
5. When the routine is completed, a dialog box displays indicating that the routine
is successfully completed.
You can monitor the progress of the routine; for more information, see Monitoring
the Routine on page 62 .