Bio-Rad Bio-Plex Manager™ MP Software Upgrade - Manual (Page 23)

Selecting a Standard Lot
User Guide | 21
Selecting a Standard Lot
Before you can select the standard lot to use with your protocol, you must first
select your analytes, format the standard wells, and create a standard lot for the
assay panel you are using if one has not already been defined for your analytes.
To select a standard lot for your protocol run
1. From the protocol dialog box, click Standards Info.
The table displays the analytes you selected on the Select Analytes pane. Each
analyte appears as a row in the table. There is a column for each standard well
you defined on the Format Plate pane. In this example, eight standard wells
were selected on the Format Plate pane, and therefore, there are eight
columns: S1, S2, and so on.
Note: The Standards Info pane is disabled until you select your analytes
and format your standard wells.
2. From the Standard Lot dropdown list, select the standard lot you want to use
with this protocol.