tekmar 284 Boiler Control - Manual (Page 49)

© 2014 284_D - 08/14 49 of 60 A Watts Water Technologies Company
Item Field Range Description
-22 to 266°F
(-30.0 to 130.0°C)
Access: ADV
BOILER INLET HIGH
Records the highest boiler inlet temperature since this item was last cleared.
Press & hold the ‘CLEAR’ button while viewing to reset.
This item is only available when a boiler inlet sensor is connected.
-22 to 266°F
(-30.0 to 130.0°C)
Access: ADV
BOILER INLET LOW
Records the lowest boiler inlet temperature since this item was last cleared.
Press & hold the ‘CLEAR’ button while viewing to reset.
This item is only available when a boiler inlet sensor is connected.
-76 to 149°F
(-60.0 to 65.0°C)
Access: ADV
OUTDOOR HIGH
Records the highest outdoor temperature since this item was last cleared. Press
& hold the ‘CLEAR’ button while viewing to reset.
This item is only available when an outdoor sensor is connected.
-76 to 149°F
(-60.0 to 65.0°C)
Access: ADV
OUTDOOR LOW
Records the lowest outdoor temperature since this item was last cleared. Press
& hold the ‘CLEAR’ button while viewing to reset.
This item is only available when an outdoor sensor is connected.
-22 to 266°F
(-30.0 to 130.0°C)
Access: ADV
INDIRECT DHW HIGH
Records the highest indirect DHW temperature since this item was last cleared.
Press & hold the ‘CLEAR’ button while viewing to reset.
This item is only available when Application Mode is not set to BAS, Indirect DHW
Mode is set to ON & Indirect DHW Sensor is set to ON.
-22 to 266°F
(-30.0 to 130.0°C)
Access: ADV
INDIRECT DHW LOW
Records the lowest indirect DHW temperature since this item was last cleared.
Press & hold the ‘CLEAR’ button while viewing to reset.
This item is only available when Application Mode is not set to BAS, Indirect DHW
Mode is set to ON & Indirect DHW Sensor is set to ON.
-22 to 266°F
(-30.0 to 130.0°C)
Access: ADV
DIRECT DHW HIGH
Records the highest direct DHW temperature (boiler supply sensor) since this item
was last cleared. Press & hold the ‘CLEAR’ button while viewing to reset.
This item is only available when Application Mode is set to DDHW.
-22 to 266°F
(-30.0 to 130.0°C)
Access: ADV
DIRECT DHW LOW
Records the lowest direct DHW temperature (boiler supply sensor) since this item
was last cleared. Press & hold the ‘CLEAR’ button while viewing to reset.
This item is only available when Application Mode is set to DDHW.
-40 to 500°F
(-40.0 to 260.0°C)
Access: ADV
VENT HIGH
Records the highest vent temperature since this item was last cleared. Press &
hold the ‘CLEAR’ button while viewing to reset.
This item is only available when a vent sensor is connected.
-40 to 500°F
(-40.0 to 260.0°C)
Access: ADV
VENT LOW
Records the lowest vent temperature since this item was last cleared. Press &
hold the ‘CLEAR’ button while viewing to reset.
This item is only available when a vent sensor is connected.
Monitor Menu (2 of 2)