Sound Devices 788T - Manual (Page 9)

Quick Start Guide
This Quick Start Guide provides a brief overview for fi rst use of the 788T/788T-SSD. The Quick Start
Guide walks through the steps of getting signal into the 788T and making a recording. Many opera-
tional and relevant technical and operational details are not mentioned in these steps. For detailed
operating instructions refer to the 788T/788T-SSD User Guide and Technical Information.
1. Connect Power.
Connect the supplied AC-to-DC power supply to the DC connector on the
Right Panel.
2. Attach the supplied Li-ion rechargeable battery to the recorder.
Line up battery contacts with the battery compartment mounting pins. Rotate
battery lock to secure the battery in place.
788T Rear Panel
Included L-Mount Battery
The included battery must be charged for six hours before initial use.
The 788T will charge the L-Mount battery when DC is connected.
3. Connect analog microphone or line sources.
Please refer to the 788T/788T-SSD User Guide and Technical Information for
connections with digital audio sources.
788T Left Panel
1
Quic
k S
tar
t Guide
788T/788T-SSD User Guide and Technical Information
1