Serial connection – Banner PresencePLUS P4 Series User Manual
Page 54
Port
Default IP Address
Socket
20006
192.168.0.1
7
20007
192.168.0.1
8
20008
192.168.0.1
9
20009
192.168.0.1
10
Serial Connection
The sensor has a single serial connection that you can configure, Serial 1:
• Serial 1 is the DB-9 connector.
Note: The Pro has 2 serial connections. Serial 2 in the dropdown list is to support those sensors.
The sensor has one serial connection that can be configured: Serial 1 is pins 1, 9, and 10. Set up the serial
communication options to match the receiving device. The following table shows the configuration options:
Default Setting
Attribute
115200
Baud Rate
8
Data Bits
None
Parity
1
Stop Bit
None
Flow Control
To setup a serial connection:
1. Click on the System button in the Main Menu toolbar to bring up the System Setup window.
2. Click on the Communication tab.
3. Choose Serial 1 from the Connection drop-down list of the Communication Tool Setup field.
P/N 000000
Banner Engineering Corp. - Minneapolis, MN USA - www.bannerengineering.com
Tel: 763.544.3164
54
7/2009
System Setup Window Overview
- PresencePLUS P4 Series (258 pages)
- PresencePLUS P4 GEO Series (16 pages)
- PresencePLUS BCR 1.3 Series (306 pages)
- PresencePLUS P4 GEO Series (256 pages)
- PresencePLUS P4 COLOR Series (2 pages)
- PresencePLUS P4 COLOR Series (384 pages)
- Area Lights (2 pages)
- On-Axis Lights (2 pages)
- Ring Lights (3 pages)
- High Power Linear Backlights (3 pages)
- Ring Lights (2 pages)
- High Power Linear Backlights (3 pages)
- PresencePLUS Lighting (2 pages)
- Ring Lights (1 page)
- Sealed PresencePLUS Pro LED Ring Lights (3 pages)
- Linear Array Lights (1 page)
- Low-Angle Ring Lights (2 pages)
- On-Axis Lights (6 pages)
- PresencePLUS Lighting (1 page)
- Spot Light Series (2 pages)
- Tubular Fluorescent Lights (1 page)
- Tubular Fluorescent Lights (5 pages)
- Ring Lights (4 pages)
- High-Intensity LED Ring Lights (2 pages)
- PresencePLUS Enclosures (2 pages)
- PPE4-G PresencePLUS Pro Enclosures (4 pages)
- PPE4-G PresencePLUS Pro Enclosures (2 pages)
- PresencePLUS PPM8 LCD Color Monitor (48 pages)
- C-Mount Lenses (24 pages)
- PresencePLUS Pro—PROII Controller (16 pages)
- PresencePLUS Pro—PROII Controller (392 pages)
- PresencePLUS Pro—PROII Controller (46 pages)
- PresencePLUS Interface Modules (4 pages)
- PresencePLUS Interface Modules (4 pages)
- PresencePLUS Interface Modules (1 page)
- PPLIM Light Interface Module (2 pages)
- Vision Brackets (1 page)
- PresencePLUS Power Supplies (1 page)
- PresencePLUS Power Supplies (1 page)
- PresencePLUS Power Supplies (2 pages)
- PSDINA-24-4 DIN-Rail Power Supply (2 pages)
- FLTI Infrared Pass Filter (2 pages)
- FLTR Red Filter (1 page)
- FLTG Green Filter (1 page)