Communication tool exportable results: locate tool – Banner PresencePLUS P4 Series User Manual
Page 127
•
on page 133
•
on page 133
•
on page 134
Analysis Tools
•
on page 134
•
on page 135
•
on page 135
•
on page 135
Communication Tool Exportable Results: Locate Tool
Description
Value
Data Label
User-defined name
string
Tool Name
1 = Tool executed successfully
0 = Tool did not find a point to use as a reference
1 or 0
Success
Fastest recorded tool processing time since the start of the
inspection or since power-up.
ms
Execution Time
Fastest recorded tool processing time for the current inspection
or since power-up.
ms
Execution Time Min
Slowest recorded tool processing time since the start of the
inspection or since power-up.
ms
Execution Time Max
Distance from the reference edge to the current edge.
pixels (X, Y)
Edge Offset Point
X, Y coordinates of the current edge.
pixels (X, Y)
Edge Location Point
Amount of rotation from the current edge to the reference edge.
degrees
Rotation
X, Y coordinates of the point from which ROIs will rotate.
pixels (X, Y)
Rotation Origin
Communication Tool Exportable Results: Geometric Find Tool
Description
Value
Data Label
User-defined name
string
Tool Name
1 = Tool executed successfully
0 = Tool did not find a point to use as a reference
1 or 0
Success
Tool processing time for the current inspection.
ms
Execution Time
Fastest recorded tool processing time since the start of the inspection
or since power-up.
ms
Execution Time Min
127
Banner Engineering Corp. - Minneapolis, MN USA - www.bannerengineering.com
Tel: 763.544.3164
P/N 000000
PresencePLUS Software Tools
7/2009