Banner PresencePLUS P4 EDGE 1.3 Series - Manual (Page 60)

Comments Optional
Qualifiers Required
Qualifiers Support
Actions Object or
Activity
Identifier System
Object,
Component,
or Activity
Retrieve the
camera
exposure None GET EXPOSURE Exposure
Get the camera
exposure None Positive Number SET EXPOSURE Exposure
Enables frame
number as None ENABLE SET FRAMETAG Frame Number
Tag
command
acceptance
indicator
Disables frame
number as None DISABLE SET FRAMETAG Frame Number
Tag
command
acceptance
indicator
Retrieve the
status of the None None GET FRAMETAG Frame Number
Tag
frame tag
indicator
Coordinate tool
Commands
Description Syntax
Returns the specified Coordinate tool output. set coordtool tool_name|tool_number x\y|angle
Gets the value get coordtool tool_name|tool_number x\y|angle
Math tool and the Remote Command Channel
Commands
Description Syntax
Sets the specified tool operand, if it is a
constant. Value should be a floating number. set mathtool tool_name|tool_number operand_1|operand_2
Gets the value of the specified tool operand, if
it is a constant. get mathtool tool_name|tool_number operand_1|operand_2
String tool
Commands
P/N 000000 Banner Engineering Corp. - Minneapolis, MN USA - www.bannerengineering.com
Tel: 763.544.3164
60
7/2009 System Setup Window Overview