Banner PresencePLUS P4 EDGE 1.3 Series - Manual (Page 187)

8
Communication Tool Setup
To set up the Communication tool, click on the System button in the Main Menu toolbar to bring up the System Setup
window, then click on the Communication tab.
8.1 Ethernet Connection
In order to establish an Ethernet connection , the external device must be directed to the correct IP address
and the correct TCP port. In TCP/IP protocol, a TCP port number is used with the IP address to identify a
specific path or socket. The sensor has sockets 1 to 10, and can send out unique sets of data to 10 different
devices.
Valid user TCP/IP port numbers are in the range of 1024 through 65535. The PresencePLUS GUI provides
automatic notification if you attempt to use a reserved port.
To view an Ethernet connection:
1. Click on the System button in the Main Menu toolbar to bring up the System Setup window.
2. Click on the Communication tab.
187 Banner Engineering Corp. - Minneapolis, MN USA - www.bannerengineering.com
Tel: 763.544.3164
P/N 000000