Banner PresencePLUS P4 EDGE 1.3 Series - Manual (Page 112)

Adding a Linear Tool
To add a tool to an inspection:
Description Field/Button
Use this field to rename the tool. The default is tool_name_1, tool_name_2,
and so on, where the default tool_name depends on the tool being created
(for example, locate, edge or the like). The name can have only alphanumeric
characters and underscores with no spaces.
Click this button to add an ROI to an image.
Click this button to remove an ROI from an image.
P/N 000000 Banner Engineering Corp. - Minneapolis, MN USA - www.bannerengineering.com
Tel: 763.544.3164
112
7/2009 PresencePLUS Software Tools