Banner PresencePLUS P4 EDGE 1.3 Series - Manual (Page 52)

6.2.1 Communication Setup
Banner Vision sensors support the following communication options:
• Ethernet Sockets 1-10
• Serial 1
• Industrial Ethernet
Ethernet Connection
In order to establish an Ethernet connection , the external device must be directed to the correct IP address
and the correct TCP port. In TCP/IP protocol, a TCP port number is used with the IP address to identify a
specific path or socket. The sensor has sockets 1 to 10, and can send out unique sets of data to 10 different
devices.
P/N 000000 Banner Engineering Corp. - Minneapolis, MN USA - www.bannerengineering.com
Tel: 763.544.3164
52
7/2009 System Setup Window Overview