Banner PresencePLUS P4 EDGE 1.3 Series - Manual (Page 121)

7.4.1 Communication Tool
The Communication tool is used to conditionally export data from the Sensor to an external device. Results
from Vision tools can be selected by the Communication tool and exported to an external device. The Sensor
can export data over the Ethernet or via its serial channels.
Examples of exported results
• Execution times
• Whole-number counts
• Input and output values from a Test tool
• Success from Locate and Test tools
• Reference point-to-edge and rotation distances
Fields
The following are fields on the Communication tool Input tab:
• Select7.4.1.2 Select on page 123
• Connections 7.4.1.3 Connections on page 123
• Format7.4.1.4 Format on page 123
• Output Filter7.4.1.5 Output Filter on page 124
• Guidelines for Configuring the Communication Tool7.4.1.6 Guidelines for Configuring the
Communication Tool
on page 124
Supported Platforms
BCR/BCR
1.3 GEO/GEO
1.3 EDGE/EDGE
1.3 AREA/AREA1.3 OMNI/OMNI
1.3 OMNI Color ProII/ProII
1.3 ProII Color
Yes Yes Yes Yes Yes Yes Yes Yes
Communication Tool Input Tab
121 Banner Engineering Corp. - Minneapolis, MN USA - www.bannerengineering.com
Tel: 763.544.3164
P/N 000000
PresencePLUS Software Tools 7/2009