Banner PresencePLUS P4 EDGE 1.3 Series User Manual
Page 23
5. Start the sofware.
6. Upon initial startup, the software communication is not configured, and the following error message
is displayed.
7. Click Yes to open the Communication screen.
8. Establish communications as follows:
Ethernet
Connection
1. When the software is started for the first time, the IP address is "Localhost."
Choose Ethernet (RJ 45).
2. Change the IP address to 192.168.0.1 (default IP address of the sensor).
3. Click OK.
23
Banner Engineering Corp. - Minneapolis, MN USA - www.bannerengineering.com
Tel: 763.544.3164
P/N 000000
Getting Started
7/2009
This manual is related to the following products:
See also other documents in the category Banner Relay:
- PresencePLUS P4 GEO Series (16 pages)
- PresencePLUS BCR 1.3 Series (306 pages)
- PresencePLUS P4 GEO Series (256 pages)
- PresencePLUS P4 COLOR Series (2 pages)
- PresencePLUS P4 COLOR Series (384 pages)
- PresencePLUS P4 Series (254 pages)
- Area Lights (2 pages)
- On-Axis Lights (2 pages)
- Ring Lights (3 pages)
- High Power Linear Backlights (3 pages)
- Ring Lights (2 pages)
- High Power Linear Backlights (3 pages)
- PresencePLUS Lighting (2 pages)
- Ring Lights (1 page)
- Sealed PresencePLUS Pro LED Ring Lights (3 pages)
- Linear Array Lights (1 page)
- Low-Angle Ring Lights (2 pages)
- On-Axis Lights (6 pages)
- PresencePLUS Lighting (1 page)
- Spot Light Series (2 pages)
- Tubular Fluorescent Lights (1 page)
- Tubular Fluorescent Lights (5 pages)
- Ring Lights (4 pages)
- High-Intensity LED Ring Lights (2 pages)
- PresencePLUS Enclosures (2 pages)
- PPE4-G PresencePLUS Pro Enclosures (4 pages)
- PPE4-G PresencePLUS Pro Enclosures (2 pages)
- PresencePLUS PPM8 LCD Color Monitor (48 pages)
- C-Mount Lenses (24 pages)
- PresencePLUS Pro—PROII Controller (16 pages)
- PresencePLUS Pro—PROII Controller (392 pages)
- PresencePLUS Pro—PROII Controller (46 pages)
- PresencePLUS Interface Modules (4 pages)
- PresencePLUS Interface Modules (4 pages)
- PresencePLUS Interface Modules (1 page)
- PPLIM Light Interface Module (2 pages)
- Vision Brackets (1 page)
- PresencePLUS Power Supplies (1 page)
- PresencePLUS Power Supplies (1 page)
- PresencePLUS Power Supplies (2 pages)
- PSDINA-24-4 DIN-Rail Power Supply (2 pages)
- FLTI Infrared Pass Filter (2 pages)
- FLTR Red Filter (1 page)
- FLTG Green Filter (1 page)