Rockwell Automation 2711PC-xxxx PanelView Plus 6 Compact Terminals User Manual - Manual (Page 35)

Rockwell Automation Publication 2711PC-UM002B-EN-P - April 2014 35
Configuration Mode Chapter 3
Device Name
When you activate a data entry field, the Device Name input panel opens. If the
field is restricted to a numeric value or IP address, then only the 0…9 and decimal
point keys are enabled.
Figure 6 - Device Name Input Panel
Figure 7 - Device Name Input Panel Controls
Follow these steps to enter characters in the display area.
1. Press a character on the keyboard:
• On a touch-screen terminal, press a key.
• On a keypad terminal, press the arrow keys on the keypad to navigate to
a key.
• If a mouse is attached, click a key.
2. Press Select to copy the character to the display area.
3. Press Enter when done to exit the input panel.
Display Area
Character Keyboard
Controls
Device Name Input Panel Controls Function
SHF Switches keys between their shifted and unshifted state. The initial default is unshifted.
CAP Switches keys between lowercase and uppercase characters. The initial default is lowercase.
SPACE Enters a space between characters in the display area.
Backspace Deletes the previous character (to the left of the cursor) in the display area.
Select F1 Selects a character and enters it in the display area.
Left, Right, Up, Down Arrow Keys Selects the character to the left, right, above, or below the currently selected character.
Enter Accepts the entered characters and returns to the previous dialog box.
ESC Cancels the current operation and returns to the previous dialog box.