Ethernet connection, Ethernet connector – Rockwell Automation 2711PC-xxxx PanelView Plus 6 Compact Terminals User Manual User Manual
Page 127

Rockwell Automation Publication 2711PC-UM002B-EN-P - April 2014
127
Connections and Communication
Chapter 6
Use only hi-speed USB 2.0 certified cables for error-free transmissions.
Connect only externally-powered USB hubs to the terminal. Before attaching
devices to a USB hub, make sure the power adapter is connected and powered on.
Ethernet Connection
The Ethernet port connects to a controller on an EtherNet/IP network by using
standard Ethernet and network connections. The port also supports application
transfers and printing.
Ethernet Connector
The Ethernet port has an RJ45, 10/100Base-T connector for network
communication and supports MDI/MDI-X connections.
WARNING: USB devices not powered by the USB port must be within the same
enclosure as the terminal. USB devices must be connected to a ground system
common with the terminal or used with a USB hub providing galvanic isolation.
TIP
The 2711P-RN20 Ethernet communication module is available for the
1000 terminals if another Ethernet port is required. The module has its own
unique IP address.
Table 41 - Ethernet Connector Pinout
Connector
Pin
Pin Name
Pin
Pin Name
RJ45 Connector
1
Transmit +
5
Unused
2
Transmit –
6
Receive –
3
Receive +
7
Unused
4
Unused
8
Unused
Table 42 - Ethernet Status Indicators
Indicator
Color
Description
Link Integrity
Yellow
On when a link is present.
Activity
Green
Blinks when activity is detected on Ethernet link.
1
8
Yellow
indicator
Green
indicator