Rockwell Automation 2705 RediSTATION Operator Interface User Manual - Manual (Page 9)

Publication 2705-UM001A-EN-P
Overview of RediSTATION 1-3
Standard Configuration The standard RediSTATION unit (Catalog No. 2705-T3DN1A42A) has 2
push buttons (start and stop) and 1 pilot light.
•
Catalog No. 800T-A1A Flush Head Push Button
•
Catalog No. 800T-B6A Extended Head Push Button
•
Catalog No. 800T-Q24R Pilot Light
The devices are prewired.
Custom Configurations You can order custom configurations to include other 800T devices
that are prewired or customer installed. The RediSTATION supports
direct connection to shallow contact blocks and 24 VDC incandescent
lamps:
•
push buttons, illuminated/non-illuminated
•
selector switches, illuminated/non-illuminated
•
key switches
•
pilot lights
Other 800T devices are supported if the depth of the device is less
than 1.92 inches (48.8 mm). Measure the device from the front
mounting surface to the back of the 800T device.
800T-Q24R Pilot Light
(red cap, 24V incandescent lamp)
800T-A1A Flush Head Push Button
(green, 1 NO Contact, 1 NC Contact)
800T-B6A Extended Head Push Button
(red, 1 NO Contact, 1 NC Contact)
Device depth must not exceed 1.92 inches (48.8 mm)