Rockwell Automation 2705 RediSTATION Operator Interface User Manual - Manual (Page 17)

1 Publication 2705-UM001A-EN-P
Chapter
2
Installation and Mounting
Chapter Objectives This chapter describes how to install and mount a standard or custom
RediSTATION. It contains the following sections:
DeviceNet Guidelines It is your responsibility to install and implement the DeviceNet
network and supported devices according to the DeviceNet
guidelines.
Equipment Needed Install the RediSTATION using standard electricians tools.
•
Wire strippers
•
Slotted screwdriver
Section Page
DeviceNet Guidelines 2-1
Equipment Needed 2-1
Removing the Enclosure Cover 2-2
Setting the DIP Switches 2-2
DeviceNet Termination 2-5
RediSTATION Dimensions 2-6
Mounting the RediSTATION 2-7
Securing the Enclosure Cover 2-8
Connecting to a DeviceNet Network 2-9