Rockwell Automation AutoMax Enhanced Ladder Editor - Manual (Page 54)

5Ć8
From the Commit Online Changes dialog box, you must choose
how to download the online changes to the Processor. You can
download the changes to the Processor by sending the changes to
the Processor and either:
D immediately install the changes in the program by selecting
Commit
D temporarily install the changes in the program by selecting Test
Mode
The changes are downloaded to the Processor as a group.
To download changes made to an online program (commit)
Step 1.
Accept the changes to an online program. See
Accepting Changes Made to Online Programs," section
5.6.
The Editor displays the Commit Online Changes dialog
box.
Step 2. From the Commit Online Changes dialog box, choose
one of the following:
To:
Choose
this
button:
Result:
Send the accepted online
changes to the Processor
and install them.
Commit The online changes are verified. See
About How Changes Made to Online
Programs are Verified," section 5.9,
for more information.
Once the changes are successfully
verified, they are downloaded to the
Processor.
Send the accepted online
changes to the Processor
and temporarily install
them.
Test Mode The online changes are verified. See
About How Changes Made to Online
Programs are Verified," section 5.9,
for more information.
Once the changes are successfully
verified, they are temporarily
downloaded to the Processor. The
program is placed into Test Mode so
that you can see how your changes
perform before they are permanently
installed in the Processor. See
Testing Programs (Test Mode),"
section 5.8, for more information.
Cancel the Commit process
and return to editing the
online program.
Cancel The Commit Online Changes dialog
box disappears. You can resume
editing the online program. Your
current modifications are unaffected.
When you are finished editing, you
must begin the Accept process again.