Rockwell Automation 1775-S5_SR5,D17756.5.5 User Manual PLC-3 FAMILY I/0 - Manual (Page 45)

Configuring the Scanner through LIST
Chapter 2
2-19
When you select this option, the programming terminal displays:
DH/DH+ SET-UP SWITCH SETTINGS (VIEW FROM TOP OF MODULE)
S1 S2
DOWN/ON
UP/OFF
SWITCH #
X X
X X
X X
X X X
8 7 6 5 4 3 2 1 4 3 2 1
STATION NUMBER IN OCTAL MODE BAUD
CURRENT SELECTION 63 DH+ 57.6KB
1 EXIT THIS MENU NOTE: SWITCH CHANGES ARE ONLY READ AFTER POWER-UP
ENTER NEXT >
MODULE
FRONT
X X X
11 - DH+ Active Node List
Select the DH+ Active Node List option from the configuration screen to
display a list of active nodes on the local link for channel four:
an X next to a station number indicates a remote station on the link.
a US next to a station number indicates the station number of the scanner
whose list configuration you are currently viewing.
LIST OF ACTIVE STATIONS ON THE LOCAL DH+ LINK
TOTAL NUMBER OF STATIONS ON LOCAL LINK 7
0 X 10 20 30 40 50 60 70
1 X 11 21 31 41 51 61 71
2 X 12 22 32 42 52 62 72
3 X 13 23 33 43 53 63 73
4 X 14 24 34 44 54 64 74
5 X 15 25 35 45 55 65 75
6 US 16 26 36 46 56 66 76
7 17 27 37 47 57 67 77
1 EXIT THIS MENU
2 REDISPLAY MENU