Rockwell Automation 1732E-OF4M12R ArmorBlock Dual-Port EtherNet/IP 4-Point Analog Input/Output - Manual (Page 54)

46 Rockwell Automation Publication 1732E-UM005A-EN-E - July 2012
Chapter 4 Configurable Features for the Analog Input and Output Modules
Real-time Sampling
This parameter instructs the module how often to scan its input channels and
obtain all available data. The data is produced at the rate configured by the RPI
parameter on the connection tab. This feature is applied on a module-wide basis.
Process Alarms
Process alarms alert you when the module has exceeded configured high or low
limits for each channel. You can latch process alarms. These are set at four user
configurable alarm trigger points.
• High high
• High
• Low
• Low low
To set process alarms via RSLogix 5000, go to page 26 .
Configurable Features for
the 1732E-OF4M12R Output
Module The following features can be configured on each of the four channels for the
1732E-OF4M12R module, unless otherwise specified.
Output Types and Ranges
Each of the four 1732E-OF4M12R output points can be configured as either
current output or voltage output, with current mode as default configuration.
Feature Page
Output Types and Ranges 46
High Engineering/Low Engineering 47
Fault Mode and Program Mode 47
Clamping/Limiting 47