Rockwell Automation 1732E-OF4M12R ArmorBlock Dual-Port EtherNet/IP 4-Point Analog Input/Output - Manual (Page 27)

Rockwell Automation Publication 1732E-UM005A-EN-E - July 2012 19
Configure Your Analog Input and Output Modules with RSLogix 5000 Software Chapter 3
2. On the Select Module Type dialog that appears, select the
1732E-IF4M12R module. Click Create.
To look for the 1732E-IF4M12R module in the list, you can type the
catalog number in the search box or use the filters. To do so, click Clear
Filters and check Analog in the Module Type Category Filters.
TIP If the 1732E-IF4M12R, 1732E-OF4M12R modules are not listed
under the analog category of the Select Module Type dialog,
you may need to download the Add-On Profile (AOP) for the
1732E ArmorBlock 2-Port and install it as an add-on to
RSLogix 5000. The AOP file can be downloaded from:
support.rockwellautomation.com/controlflash/LogixProfiler.asp