Rockwell Automation 1760-xxxx Pico Controller User Manual - Manual (Page 38)

Publication 1760-UM001D-EN-P - September 2005
2-14 Installation
Recommended Surge Suppressors
Use the Allen-Bradley surge suppressors shown in the following table
for use with relays, contactors, and starters.
Connect the Inputs Pico inputs switch electronically. Once you have connected a device
via an input terminal, you can reuse it as a relay contact in your
program as often as you like.
Connect devices such as buttons or switches to Pico input terminals.
Suppressor Device Coil Voltage Catalog Number
Bulletin 509 Motor Starter
Bulletin 509 Motor Starter 120V ac
240V ac 599-K04
599-KA04
Bulletin 100 Contactor
Bulletin 100 Contactor 120V ac
240V ac 199-FSMA1
199-FSMA2
Bulletin 709 Motor Starter 120V ac 1401-N10
Bulletin 700 Type R, RM Relays ac coil None Required
Bulletin 700 Type R Relay
Bulletin 700 Type RM Relay 12V dc
12V dc 700-N22
700-N28
Bulletin 700 Type R Relay
Bulletin 700 Type RM Relay 24V dc
24V dc 700-N10
700-N13
Bulletin 700 Type R Relay
Bulletin 700 Type RM Relay 48V dc
48V dc 700-N16
700-N17
Bulletin 700 Type R Relay
Bulletin 700 Type RM Relay 115-125V dc
115-125V dc 700-N11
700-N14
Bulletin 700 Type R Relay
Bulletin 700 Type RM Relay 230-250V dc
230-250V dc 700-N12
700-N15
Bulletin 700 Type N, P, or PK Relay 150V max, ac or DC 700-N24
Miscellaneous electromagnetic
devices limited to 35 sealed VA 150V max, ac or DC 700-N24
+24 V
S1
com I1
L1
L2
I1
I1