Rockwell Automation 160 DEVICENET (DN1) MODULE FRN 1-2.XX - Manual (Page 29)

Publication 0160-5.5 - September 1997
5-4 DeviceNet Parameter Descriptions
Bulletin 160 SSC Interface
Parameters When P15-[Interface Select] is set to 0, the Bulletin 160 SSC Inter-
face is selected. When this interface is selected, parameters are
grouped together logically. The following sections provide informa-
tion about the Bulletin 160 SSC Interface parameter groups:
• Interface Select Parameter.
• DeviceNet Parameters.
• Drive Display Parameters.
• Drive Program Parameters.
The following tables summarize the Bulletin 160 SSC Interface. For
more detailed information on the Display Group and Program Group
parameters, refer to the Bulletin 160 SSC User Manual.
Important: The following sections contain references to object map-
ping. This information is needed when using Explicit Messaging.
Refer to Chapter 6, page 17, for more information.
Interface Select Parameter The DeviceNet module contains the parameter used to select either
the Bulletin 160 SSC Interface or the ODVA Drive Profile interface.
DeviceNet Parameters See next page.
Parameter
Number
Name and Description
Object Mapping
(Class-Instance-
Attribute)
Min./Max.
Range
Factory
Default
15 [Interface Select]
This read/write parameter selects the current parameter set or interface for the
Communication Module.
0 = Bulletin 160 SSC Interface
1 = ODVA Drive Profile 0xB4-1-2 0 to 1 0