Yamato Scientific HC200 Cool Block - Manual (Page 9)

7
Caution Caution Caution Caution
Handling of power code.
•
Do not use the power cord if it is bundled or tangled. If it is used in this manner, it can overheat and
fire may be caused.
•
Do not process, bend, wring, or stretch the power cord forcibly. Fire or electrical shock may result.
•
Do not put the power cord under the desk, chair, etc., or through an object. Fire or electrical shock
may be caused.
•
Do not run the power cord next to heating equipment such as a heater. The cover of the cord may
melt and fire or electrical shock may result.
•
When the power cord is damaged (exposure of the core wires, disconnection, etc.), turn OFF the power
key right immediately, then turn OFF the circuit breaker and the main power. Contact customer service
for a replacement immediately. If this procedure is not followed, fire or electrical shock may be
caused.
Wipe off the condensation
•
The condensation may appear on aluminum block when temperature rises after a cooling device
works. Wipe off the condensation with a cloth in that case.
Install an aluminum block
•
Install an aluminum block correctly in the depression of main unit.