Yamato Scientific HC200 Cool Block - Manual (Page 20)

18
Changing from Program Operation to Fixed Temperature Operation
Indication after Step/Step Procedure Explanation
1. Push the MENU key.
•
Push the MENU key during the program operation.
⇒ ⇒ ⇒ ⇒ HC200 changes to the fixed temperature operation’s
desired temperature setting mode.
⇒ ⇒ ⇒ ⇒ The sub display flashes the preset desired
temperature of the latest fixed temperature
operation.
Ex. In the example on the left, the sub display shows
that the previously preset temperature was 56 ° C.
2. Ex., setting the temperature at 60
°
C.
Push either the ▼ key or ▲ key.
•
Push either the ▼ key or ▲ key and set your desired
temperature on the sub display.
! If you do not change the previously preset
temperature; proceed to Step 3.
3. Push the ENTER key.
•
After you set your desired temperature on the sub
display, push the ENTER key.
⇒ ⇒ ⇒ ⇒ Pushing the ENTER key stops the ongoing program
operation, and operation mode switches to the fixed
temperature operation.
⇒ ⇒ ⇒ ⇒ The temperature on the sub display changes from
flashing to steady lit, and HC200 starts the fixed
temperature operation.
⇒ ⇒ ⇒ ⇒ The PROGRAM lamp goes out, and the FIXED-
TEMP lamp turns from flashing to steady lit.