Yamato Scientific HC200 Cool Block - Manual (Page 29)

27
The Abort (Forced Stop) Function
Forced Stop Function is for putting the ongoing fixed temperature operation or quick auto-stop
operation or program operation to a stop, and changing to the standby condition that no operation
is selected.
Indication after Step/Step Procedure Explanation
1. Push the MODE key and either the ▼ key or
the▲ key.
•
.Push the MODE key and press either the ▼ key or
the▲ key several times to flash on the main
display.
2. Push the ENTER key
•
Push the ENTER key.
⇒ ⇒ ⇒ ⇒ The main display flashes , while the sub
display shows .
3. Push the ENTER key
In the standby condition before slecting
operation
•
Push the ENTER key.
⇒ ⇒ ⇒ ⇒ HC200 will be in the standby condition before
selecting operation.