Yamato Scientific HC200 Cool Block - Manual (Page 55)

53
Optional accessories
Aluminum Blocks
1. For a micro tube (1.5ml x 20pieces)
♦ 20 micro tubes of 1.5ml are able to attach.
♦ Diameter of the hole is 11 mm.
♦ When there are many specimens in the
micro tube, the volume may swell if you run
the unit at high temperature, and it may
cause an overflow of the tubes. Make the
amount of specimens little and attach it to
the unit.
2. For a micro tube (0.5ml x 20pieces)
♦ 20 micro tubes of 0.5ml are able to attach.
♦ Diameter of the hole is 8 mm.
♦ When there are many specimens in the
micro tube, the volume may swell if you run
the unit at high temperature, and it may
cause an overflow of the tubes. Make the
amount of specimens little and attach it to
the unit.
3. For a micro plate
♦ 1 micro plate of 96 holes is able to attach.
♦ When there are many specimens in the
micro plate, the volume may swell if you run
the unit at high temperature, and it may
cause an overflow of the plate. Make the
amount of specimens little and attach it to
the unit.
Micro plate
(not equipped)