Yamato Scientific HC200 Cool Block - Manual (Page 24)

22
Changing Sub Display Screens
♦ You can switch the screen on the sub display when HC200 is in the quick auto-stop operation or
the program operation.
♦ You can select/check the preset temperature along with the remaining time before the operation
stop during the quick auto-stop operation. Other selections maybe -- the preset temperature, the
remaining time before the ongoing segment finishes, the parameters of the ongoing segment, and
the remaining number of repeat cycles (possible only during the repeat operation).
Indication after Step/Step Procedure Explanation
1. Push the MODE key.
Ex. Information on the preset temperature
display mode.
•
Push the MODE key during the quick auto-stop
operation or the program operation.
⇒ ⇒ ⇒ ⇒ The controller turns to the sub display screen
changing mode, and the main display flashes
(display).
⇒ ⇒ ⇒ ⇒ The sub display shows the description of the
presently set mode.
2. Push the ENTER key
•
Push the ENTER key.
⇒ ⇒ ⇒ ⇒ The controller turns to the sub display setting mode,
and the main display flashes the description that was
shown on the sub display.
⇒ ⇒ ⇒ ⇒ The sub display shows
3. Push either the ▼ key or the ▲ key.
•
Push either the ▼ key or the ▲ key.
⇒ ⇒ ⇒ ⇒ Every time you push the key, the main display
switches from (rest for remaining time) and
(ongoing program and ongoing segment) to
(preset temperature) in this order while
flashing them.
! If HC200 is in the repeat operation of a program,
pushing the ▼ key or the ▲ key allows you to check
the remaining number of repeat cycles. In this
instance, the main display flashes
(repeat
count for remaining number of repeat cycles).
4. Push the ENTER key
I ndicating the ongoing program
•
When the sub display shows the information you need,
push the ENTER key.
⇒ ⇒ ⇒ ⇒ The main display shows the latest measured
temperature.
⇒ ⇒ ⇒ ⇒ The sub display shows the information of the set
parameters.
Ex: The example on the left -- the sub display shows
the ongoing program number and the ongoing
segment number.
(Ongoing Segment
Number) (Ongoing Program
Number)