Yamato Scientific HC200 Cool Block - Manual (Page 17)

15
Changing Operation Mode
Changing to Quick Auto-Stop Mode
Use the quick auto-stop mode when you want to stop the ongoing fixed temperature
operation after the desired time.
Indication after Step/Step Procedure Explanation
1. Push the MENU key.
When the ongoing program number starts flashing, push
either the ▼ key or the ▲ key.
(Ex. Only Program 1 is operational)
•
Push the MENU key during the fixed temperature
operation.
⇒ ⇒ ⇒ ⇒ The main display flashes either the operation
program number or (auto-stop).
Ex: In the example on the left, flashes on the
main display.
•
If the display flashes an operational program number,
push either the ▼ key or the ▲ key to show .
⇒ ⇒ ⇒ ⇒ The PROGRAM lamp starts flashing.
⇒ ⇒ ⇒ ⇒ Since the fixed temperature operation is going on,
the HEAT lamp keeps flashing, that indicates that
HC200 is under temperature regulation.
2. Push the ENTER key.
•
Push the ENTER key.
⇒ ⇒ ⇒ ⇒ The main display flashes
⇒ ⇒ ⇒ ⇒ The sub display flashes
3. Ex., stopping operation in 2 hours 30 minutes.
Push either the ▼ key or the ▲ key.
•
Push either the ▼ key or the ▲ key and set your
desired time before operation stop.