Yamato Scientific HC200 Cool Block - Manual (Page 28)

26
The Escape Function
♦ Use the ESCAPE function when you want to cancel the function menu, inputting or editing a
program to repeat it from the beginning.
♦ You can use the ESCAPE function when the controller is on the program number setting mode for
the following: a) inputting or editing a program, b) the segment setting mode for editing a
program, and c) the program delete mode for deleting a program.
♦ When you activate the ESCAPE function and push the ENTER key, the display returns to the
screen shown just before your setting action.
Indication after Step/Step Procedure Explanation
1. (When you want to cancel the function menu.)
Push either the ▼key or the ▲ key, after pushing the
MODE key.
2. (When you want to cancel inputting or editing
a program.)
On the program number setting mode –
3. (When you want to cancel deleting a program)
Push either the ▼key or the ▲ key
•
Push the MODE key to set the function selection
mode, and push either the ▼key or the ▲ key.
⇒ ⇒ ⇒ ⇒ The main display flashes
•
Push the ENTER key.
⇒ ⇒ ⇒ ⇒ Pushing the ENTER key releases the function
selection mode, and the display return to the screen
shown just before your setting action.