Yamato Scientific HC200 Cool Block - Manual (Page 32)

30
Loading a Preset Temperature
You can load a preset temperature and use it as a desired temperature for the fixed
temperature operation.
Indication after Step/Step Procedure Explanation
1. Loading a preset temperature for the fixed
temperature operation.
Push both the ▼key and the ▲ key simultaneously for
more than 1 second.
•
Push both the ▼key and the ▲ key simultaneously for
more than 1 second.
⇒ ⇒ ⇒ ⇒ The controller turns to the preset temperature
loading mode. The sub display flashes a registered
temperature.
2. Push either the ▼ key or the ▲ key.
Ex. loading 37 ℃
•
Push either the ▼key or the ▲ key to flash a
temperature to be loaded on the sub display.
In the example on the left, 37
o C is loaded.
3. Push the ENTER key
•
Push the ENTER key.
⇒ ⇒ ⇒ ⇒ HC200 starts the fixed temperature operation toward
the loaded temperature.
Canceling to Load a Preset Temperature
You can cancel loading a preset temperature before pushing the ENTER ENTER ENTER ENTER key. Follow the
procedure below. After the cancellation, the displays return to the previous screens in about
1 minute even without pushing the ENTER ENTER ENTER ENTER key again.
Indication after Step/Step Procedure Explanation
Temperature setting mode before loading a
preset temperature.
Push both the ▼key and the ▲ key simultaneously
for more than 1 second.
•
When you want to cancel a registered preset
temperature after loading, push both the ▼key and the
▲ key simultaneously for more than 1 second.
⇒ ⇒ ⇒ ⇒ The controller returns to the temperature setting
mode before your loading action.
Ex. a measured
temperature of 25
℃
Ex. a registered preset
temperature of 10
℃